Hedging equipment range offers something for everyone

PFC Agri Solutions is offering direct sales of the Elkaer hedging equipment for agriculture, forestry, railway and lawn maintenance. Looking specifically at the HKL Fox frame and HS2300 saw unit,

Hedging equipment range offers something for everyone

PFC Agri Solutions is offering direct sales of the Elkaer hedging equipment for agriculture, forestry, railway and lawn maintenance.

Looking specifically at the HKL Fox frame and HS2300 saw unit, it provides massive output in dense hedges and forestry conditions when mounted to tractor front loaders or a telehandler, PFC says.

They are particularly suitable for maintaining all kinds of hedges, paths and railway lines with a branch thickness up to 25cm. The heavy-duty HKL Fox frame offsets hydraulically by up to 1.5m. The fallen debris can be collected for disposal or chipping with a front grab when the tractor is fitted with front linkage.

A rear flail topper can mulch the debris in one pass up to 100mm. The HKL Fox will pivot the saw head 210 degrees, allowing hedges to be shaped as required. The complete system requires two double acting valves and a free-flow return to operate the saw blades. This can be linked directly to the tractor spool valves or utilise the optional electrohydraulic valve

The HS2300 saw head has 2.3m cutting width using 3 x 80cm blades. The bales are offset to promote an even feed of material and significantly reduce the risk of blade stalling. The blades only require 65-litres/min oil flow for full output with operating speeds up to 8kph. The saw is protected by a depth wheel when operating close to the ground level.

The smooth finish of hedges that are overgrown compared to the flair trimmers means that the habitat for wildlife recovers faster and helps maintain the natural barrier a hedge is supposed to provide.

PFC also offers a full line of contractor equipment for highway, forestry, railway and lawn maintenance.

Focusing on the highest capacity saw heads available, PFC offers the HS2300 and HS3800 with cutting widths of 2.3m and 3.8m respectively. The company says the saws share some impressive statistics to provide massive output in dense hedges and forestry applications, whether mounted to tractor front loader, 360-degree excavator or the HK-Max multi-function tool frame.

Both machines are fitted with belt- driven 800mm blades, powered by either a standard orbital motor or optional piston motor requiring only 60-litres/min oil flow and a maximum working pressure of 250-bar. The large blade size can cut through a maximum branch diameter of 250mm.

The HK-Max multifunction tool frame with stability wheel offers a maximum working height of 8.5m with 7.2m of horizontal movement. To increase output and reduce operator fatigue, an electronic adjustment device allows for even cutting over rough terrain in addition to the electronic joystick control.

Finally, to create a true one pass machine, the PTO driven SK2500 mulcher can pulverise branches and heavy scrub up to a diameter of 100mm.

For those operators who increasingly have to deal with two- or three-year growth, a saw head is the best answer over a flail head, PFC reckons. Using a saw head will leave an even clean cut providing a faster habitat recovery and better secure boundary.

Operating cost is also a factor. Flails are expensive to run on heavy material while also requiring multiple passes. The HS saw head will finish both sides of the hedge in as little as three passes with the HS2300 or HS3800.

For your hedging equipment needs, the Elkaer range has the quality and product specification you require, PFC says. With many options available, there is something for everyone, from the smaller operation to large-scale hedge management.

Need help? Click here

© FarmAds 2024. All Rights Reserved. Privacy Policy Terms & Conditions

Website Design by Unity Online