Sheep and cattle farmers are being urged to monitor for liver fluke this autumn, as early indications suggest the risk may be higher than usual.

A provisional forecast from Nadis predicts high risk in Scotland, north west England and north Wales, and moderate risk in Northern Ireland.

John Graham Brown, of Nadis, said: “While the predicted risk may be low in some areas, local conditions are very important. Farms in these regions that have consistently wet, boggy grazing, must assess their risk carefully in the coming months.

“Autumn fluke risk is also dependent on eggs being present on the pasture, so areas that were grazed by infected cattle or sheep earlier in the season should be considered a risk.”

Levels of fluke were relatively low last autumn and winter, according to Lesley Stubbings, of the Sustainable Control of Parasites in Sheep (Scops), but many areas have been wetter this year. Reports show there is already some disease in high risk areas and experts say the need for testing is greater than ever.

Speaking on behalf of Control of Worms Sustainably (COWS), Diana Williams of Liverpool University, advised farmers to utilise the testing tools available, including blood tests.

“At this early stage in the season, blood testing this year’s lambs gives us the earliest indication of a challenge, because it only takes about four weeks after infection for antibodies to be present,” she explained. “If they test positive, we know liver fluke are present and treatment is indicated, because they can only have been infected this summer/autumn.

“Taking action will avoid losses due to fluke in high risk situations, but remember that testing can also avoid unnecessary treatments if animals are not infected with liver fluke. This saves money and time and helps us protect the few medicines we have available to combat this parasite.”

Rebecca Mearns, of Biobest Laboratories, said she has only seen a few positive coproantigen ELISA tests so far this season, but this could be because it is early in the season and flukes are still immature.

“It is really important to consider re-testing in four to six weeks if this is the case. In contrast, the blood test has shown some high positives in parts of Wales from as early as the end of July. In dairy cattle we’ve also seen some high antibody levels in bulk milk samples in some herds and, with housing for cattle now starting, it is important to seek advice on appropriate treatment.”

Liver fluke should be considered as a cause of poor performance, or if lambs are not growing as expected – particularly if other causes have been ruled out.

An opportunity to purchase the holy grail for collectors of the popular County tractor presents itself at Cheffins’ Vintage Sale on Saturday 19th October.

In superb condition and with low hours, the 1982-registered County 1884 tractor is expected to attract an enthusiastic crowd when it comes under the hammer at Cheffins’ Saleground in Sutton, near Ely.

The 1884 is the last and largest of all the tractor models to be introduced by the original firm of County Commercial Cars Ltd of Fleet in Hampshire. Just a handful were built before the company went into receivership in February 1983 and two of them were exported.

The company continued under the auspices of the reformed County Tractors Ltd, but sales were extremely limited with the last supplied in 1989-90 and estimates suggest there are no more than 20 County 1884s in preservation.

Scarcity is only one of the factors contributing to the 1884’s desirability. Much of its allure is down to its striking appearance and eye-catching appearance. Based on the Ford TW-30, it used a turbocharged and intercooled version of the 401S engine delivering 188hp.

The 1884 was the first of the ‘long nose’ County tractors and had an extended bonnet housing the oil-cooler and main fuel tank.

This model was purchased as new from the Essex dealership, Cleales Ltd of Saffron Walden and Haverhill by Butler’s Farms of Halstead and changed hands three years later to its present owners who it has remained with since. It has recorded only 3,833 hours.

The high specification the County 1884 tractor meant they came with a hefty price tag as new and the annotation in a price list that has survived with the tractor suggests its purchase price was £40,940.

The tractor will be sold with full documentation including its original manuals, parts book and sales leaflet.

Bill King, chairman of Cheffins, said: “This is almost certainly the strongest Vintage Sale for tractors we have ever put together at Cheffins.

“In any normal year without such an iconic tractor as the Ivel Agricultural Motor, this County 1884 would be far and away the standout lot and you could say that for many other tractors in the sale, too.”

The full catalogue for the Vintage Sale, which contains 200 vintage and classic tractors and 2,000 lots in total, can be found HERE.

Massey Ferguson, a worldwide brand of AGCO (NYSE:AGCO), is delighted to announce the launch of its high specification ‘NEXT Edition’ tractors at Agritechnica 2019 in Hannover on 10^th November.

The exclusive NEXT Edition specification is now available on four of Massey Ferguson’s most popular models:

• 110hp, MF 5711 S Dyna-4
• 130hp, MF 5713 S Dyna-4
• 200hp, MF 7720 S Dyna-VT
• 255hp, MF 7726 S Dyna-VT

Massey Ferguson has created the ‘NEXT Edition’ versions by combining elements of the MF 5700 S Essential and MF 7700 S Exclusive packages with further performance and comfort enhancing features, wrapped up in an exclusive and distinctive livery.

This straightforward package delivers unrivalled levels of performance and great value for money to enhance productivity for dairy, mixed, arable farmers and contractors.

“We just simply looked at our customers’ needs in these segments considering our best-selling tractors, as well as the preferred options, equipment and transmissions,” says Francesco Quaranta, Vice-President Sales & Marketing Massey Ferguson Europe & Middle East.

“To celebrate these successful models, we decided to meet these precise needs with a really attractive package. The NEXT Edition tractors take our future customers to the NEXT level of performance and straightforward dependability – when it comes to getting the job done on the farm. We want to offer them the best value for money.

“The NEXT Edition specification adds a distinctive and exclusive touches inside and out,” he adds. “These tractors feature a unique ‘NEXT Edition’ emblem on the bonnet, as well as an exclusive plate inside, which shows its special, ‘limited NEXT Edition’ build number. NEXT Edition models come in the iconic MF red colour, but with distinctive black grilles as standard. For those looking for further exclusivity, they can also choose a full black livery for the same price,” says Mr Quaranta.

Next Edition models will be available for new orders from October 1^st, 2019. They will be on display on the Massey Ferguson stand at Agritechnica 2019, Hall 20 Stand B14c.

Two new MF 5700 S Dyna-4 NEXT Editions

Massey Ferguson is introducing two new NEXT Edition models in the MF 5700 S series – the 110hp, MF 5711 S Dyna-4, 130hp and MF 5713 S Dyna-4.

Both tractors are equipped with the renowned Dyna-4 semi-powershift transmission as standard. This offers exceptional performance in the yard, field or on the road – offering 16 forward and 16 reverse speeds all selected on one lever, without using the clutch.

These agile, highly manoeuvrable tractors offer excellent visibility over the slim dashboard and narrow steep-nose bonnet. With its left-hand Power Control lever, the Dyna-4 transmission provides straightforward control to change direction, shift speeds and select neutral. Together with the boosted hydraulic flow, this makes them the ultimate loader tractors.

NEXT Edition models expand the already comprehensive standard ‘Essential’ specification, which includes:  Engine speed memory, brake to neutral, air conditioning with manual adjustment, telescopic twin-angle mirrors and the high visibility, steep nose bonnet,

Further increasing specification on the NEXT Edition are additional features to increase performance and comfort:

• Automatic, air suspended swivel seat
• Mechanical cab suspension
• 100 litres/min hydraulic oil flow – for optimum loader operation and to boost field performance
• AutoDrive function on the Dyna-4 transmission automatically changes speeds to increase output and versatility
• Three mechanical spool valves
• Up to 12 LED work and road lights (depending on roof option)
• Further standard tyre size choice including: 540/65R38 – 440/65R28
• 28m wide rear fenders and extensions
• Further options and equipment to personalise the NEXT Edition models as well as match any specific market/country needs.

Two new MF 7700 S NEXT Editions

Both the 200hp, MF 7720 S NEXT Edition and the 255hp, MF 7726 S NEXT Edition models are equipped with the state-of-the-art Dyna-VT CVT transmission.

Designed specifically to meet the needs of agricultural professionals from mixed farming to arable and contracting businesses, these new tractors employ straightforward, dependable technology to deliver ultimate efficiency and low operating costs.

The highly efficient NEXT Edition models, with their impressive traction and lift  capacities excel in the field and on the road, with superb fuel economy, long service intervals and low maintenance requirements reducing running costs.

The NEXT Edition models further increase the existing ‘Exclusive’ specification, which already provides:  Closed-centre 110 litres/min hydraulics, four electronic spool valves, mechanical cab suspension, Command Control Armrest with Multipad lever, cruise control and Clutch Effect. They also come with Quadlink front axle suspension, automatic air conditioning, mirrors with electric de-icing and adjustment and Datatronic 4 terminal to manage all tractor functions.

On top of this impressive specification, NEXT Edition models are equipped with even more automation and advanced features to improve comfort, operation and performance:

• Heavy duty Integrated Front Linkage System (IFLS), offering up to 4,000kg lift capacity, with dedicated front valve control
• SpeedSteer, which provides faster and easier manoeuvring, by reducing the number of steering wheel revolutions needed to make turns
• Auto-Guide ready, including additional Fieldstar 5 touch-screen terminal plus the option of further precision farming functions
• 55m wide rear fenders with rear extensions
• Wide pivoting front fenders (depending on tyre size)
• New standard tyre sizes including 650/65R42 – 540/65R30 to improve traction and prevent compaction
• Up to 16 LED work and road lights
• Further options and equipment to personalise the NEXT Edition models, as well as match any specific market/country needs.

John Deere has launched its next generation of self-propelled sprayers, manufactured at the company’s Horst factory in The Netherlands. With the new R4140i 4000-litre capacity and R4150i 5000-litre capacity machines, engineers have further increased performance, precision, safety and operator comfort.

The focus of these latest developments has been on improving sprayer output while ensuring that the highest possible application quality is maintained and also delivering an improved operator environment. The premium design cab offers a new generation operator interface with fully integrated technology, such as the John Deere universal 4640 display mounted on a new armrest.

JDLink telematics for wirelessly transferring data both to and from the sprayer is available as standard, including free activation for five years. An upgraded lighting package improves visibility at night, both when working in the field and filling the sprayer with chemicals, to ensure maximum productivity in all conditions. The new cab is available at two specification levels depending on customer requirements, as well as with optional Category 4 operator protection to meet the latest safety regulations.

Both models are available with steel booms from 24 to 36m wide, and continue to use John Deere’s leading PowrSpray solution system, with direct rate control for fast filling and highly accurate application rates. Combined with the innovative, automated AirRinse system, this reduces the solution system’s dead volume to as low as 5 litres for maximum cleaning performance.

To ensure that nozzles are no longer a limiting factor for efficient spraying, ExactApply is now available as an option on the new R4140i and R4150i. Already available for two years on US machines, ExactApply is an ‘intelligent’ solution that combines the ability to change spray nozzles manually from the cab or automatically depending on application rate and speed. It can also maintain droplet size while changing speed through the use of pulse width modulation (PWM) technology up to 30Hz.

With ExactApply, each nozzle is controlled individually via GPS based section control. Furthermore, with PWM enabled, turn compensation ensures that application rates remain consistent across the full boom width even when turning the sprayer. ExactApply technology enables savings in crop protection products of around £5/ha, while at the same time yield can be increased by up to three per cent by reducing under/overdosing to a minimum.

To reduce non-productive time on the road, the sprayers also feature a new 50kph transmission option. Production of the John Deere R4140i and R4150i self-propelled sprayers starts in October 2019, with availability from dealers planned for early 2020.

The LAMMA show is set to build on its reputation as the UK’s largest agricultural event dedicated to showcasing innovation when it returns to its new permanent indoor venue at the National Exhibition Centre in Birmingham next January.

Over 95% of stand space has already been sold for the 2020 event, following the triumph of LAMMA’s NEC debut earlier this year. So far 577 previous and new exhibitors have confirmed their attendance to show a host of UK and global machinery and technology.

In addition, the event will also host a new feature, Farming 4.0, highlighting the expertise, flair and passion for innovative technology that exists in UK Agriculture to encourage the new blood the sector needs to help underpin its future.

LAMMA’s move to the NEC in Birmingham brings together all farming sectors under one roof to do business in a thriving environment. The event also provides a great opportunity to network and discuss the latest events affecting agriculture.

Many conversations will centre on the latest Brexit news and how to react to it, while climate change and carbon issues will no doubt be a hot topic in the livestock hall, which is now sold out.

“UK agriculture finally has a show to rival its European counterparts and we believe LAMMA’20 will be even bigger and better than the last,” says AgriBriefing group events director Elisabeth Mork-Eidem.

“The NEC provides a very comfortable environment in which to view and discuss the vast array of agricultural kit on show and to talk business, leading many exhibitors at LAMMA’19 to comment on the high quality of conversations they had with visitors.

“The overriding feedback was that the new indoor venue proved ideal for a national event of this size and stature, showing our agricultural sector in the best possible light.

“This has been underpinned by the highly encouraging uptake of stand space for the 2020 event. In all, 11 halls at the NEC are set to host more than 700 exhibitors, reflecting LAMMA’s reputation as the UK’s most diverse and innovative machinery, equipment and services show.”

Many exhibitors will unveil new tractors, combines, drills and cultivation equipment, feeder wagons and forage machinery, as well as a wide range of innovative technology.

Warren Rivers-Scott, UK and ROI managing director of Bednar FMT, a new exhibitor for LAMMA’20, said: “The decision for Bednar FMT to make its UK debut at LAMMA’20 was, for me, an obvious one. With over 400m², we will be able to show some of our offerings including specifically design CTF approved machines, including other new releases.”

Rachael Groves, marketing coordinator at AgriArgo UK, a long-term exhibitor at the event, said: “Based on the positive feedback and high level of enquiries from both customers and dealers alike at LAMMA’19, we will be returning in 2020 to build on our success with the Landini and McCormick brands.”

Kate Bennett of Kuhn Farm Machinery said: “LAMMA is very important to the industry and it will only grow from what it is today. It’s a great shop window for everyone to exhibit their innovations and machinery.”

Fendt UK and Ireland marketing manager Richard Miller said: “We at Fendt are extremely pleased to announce our return to LAMMA in 2020.

“The event is a tremendous opportunity for us to showcase our new products and the opportunity to talk to existing and potential customers about their business requirements for 2020 and beyond. It is also an opportunity to support the fantastic industry that we all work in.”

Herefordshire farmer Ally Hunter Blair said: “I thoroughly enjoyed attending LAMMA’19 and I look forward to going back to see how the show develops in 2020. It is important for the UK to retain a show of this calibre and I hope it continues to go from strength to strength.”

East Yorkshire farmer Jono Dixon said: “LAMMA’19 in my opinion was a huge success. Provided LAMMA’20 attracts a similar quality of exhibitors to last time I think we can look forward to another excellent show.”

Join the farming revolution!

To help address the needs of younger people entering the industry, LAMMA’20 is launching a brand new zone, Farming 4.0, to highlight UK farming’s expertise, flair and passion for innovative technology that will help underpin the future of food production.

It aims to encourage new talent into agriculture, challenging the outdated perceptions of working in agriculture and educating new entrants about all avenues of farming, including technology, robotics and digital.

“The zone will cover training and development which plays a fundamental role in the future of farming, especially in the machinery sector where so much exciting technology is being introduced at a rate no-one would have thought possible a few years ago,” said Ms Mork-Eidem.

Alex Macdonald-Smith of aerial data specialist Drone-Ag said: “It’s great to see a big show like LAMMA dedicating itself in part to the next agricultural revolution with the new Farming 4.0 zone.

“Drone Ag is going to be releasing Skippy Scout soon, and we’re very excited to be showing off this brand new, innovative technology within a dedicated zone.”

Visitor registration opens

To help make the most of their time at LAMMA’20, visitors are being asked to register in advance. This simple four-step process is now open at www.lammashow.com.

Badges will be emailed automatically within a few minutes of completing the form, ensuring visitors can walk straight through to the show when doors open on Tuesday 7^th and Wednesday 8^th January.

As well as enjoying fast-track entry into the show, visitors will be able to use their badges to share details quickly and easily with exhibitors.

Advance registration is not compulsory – visitors can register at the entrance but may face a delay entering the event.

LAMMA’20 will take place at the NEC on Tuesday 7th and Wednesday 8th January 2020. Parking and entry to the event are free.

For further LAMMA information see www.lammashow.com

A competition to find the best farm sprayer operator in the UK is now open for entry to the 2020 awards.

Syngenta’s Farm Sprayer Operator of the Year (FSOOTY) award aims to reward the country’s top sprayer operators, while sharing tips and best practice that could help operators enhance their results and protect the environment.

The application of crop protection products is one of the most complex jobs faced on the farm, Syngenta says. Today’s operators are faced with many possible challenges, along with demands for ever greater accuracy and precision.

Application specialist James Thomas says it’s not about having the latest kit, but the aptitude and attention to consistently deliver the best possible results with every application.

“The use of plant protection products is under constant scrutiny, so it is important to use them safely and efficiently in a way that meets crop needs, as well as public, operator and environmental safety,” he adds.

“It’s a tricky balance, but for many operators it comes as second nature. FSOOTY seeks to recognise and reward operators’ skills.”

All operators who can demonstrate ingenuity and an ability to meet these varying objectives by using agrochemicals effectively, are in with a chance of winning.

The winner will receive a trip to Agritechnica in 2021, with all expenses paid. Six finalists will get an expenses-paid trip for two to Cereals 2020, while 20 runners up will get a free ticket to Cereals next year.

All entrants also enjoy the chance to meet and share experiences with like-minded sprayer operators.

Enter FSOOTY 2020 here: www.syngenta.co.uk/fsooty

Farmers are being urged to fully understand the legal implications of drone use and seek training ahead of new 2020 regulations.

New regulations published on 21^st June by the Civil Aviation Authority (CAA) will require farmers to become more aware of how to deploy drones on their land. However, despite having been published, the EU unmanned aircraft regulations will not come into effect until July 2020. This gives farmers and other operators the opportunity to prepare for the proposed changes to drone use.

Cranfield University is a leader in aerospace research and the use of drones in agriculture. Through the Agrifood Training Partnership (AFTP), Cranfield is offering farmers, agronomists, and anybody likely to use drones in agriculture, the opportunity to learn how drones can be used responsibly and effectively to monitor and manage crops.

Dr Monica Rivas Casado, who will tutor a flexible e-learning online course entitled ‘Drones for crop production’ which starts on November 18^th explains: “The use of drones in agriculture is increasing. However, regulations governing the use of drones in all areas are becoming more complex. It is therefore important that farmers understand how drones can benefit crop production whilst also being able to use drones within the regulations set out by the CAA.”

Research compiled by Price Waterhouse Coopers estimates 76,233 drones will be used in the UK by 2030. It is further estimated that over a third of these drones (25,732) will be used in agriculture. Farmers already use drones for crop spraying and health assessments. The drones use normal and thermal cameras to deliver a level of insight into field crop health that is not obvious to the eye and reduces the need for farmers to walk fields to understand how well crops are performing.

“Drones offer farmers an opportunity to view crops quickly and efficiently. The efficiencies drones offer can save crops from disease and feedback vital information about how well crops are establishing. However, it is crucial that farmers understand how to deploy drones safely and effectively on their farm by being aware of these new regulations,” says Monica.

In addition to being aware of CAA regulations, those who study the course will also learn how drones can be applied in agriculture, how to differentiate between drones, and what software is available for crop monitoring. The course will cover how to interpret the data generated by drones and how this can be used to improve crop and land management. Soil health, crop establishment and disease can all be assessed by evaluating drone data which saves time and discovers crop production issues more quickly.

“The projected increase in food demand, driven by climatic factors, increased populations and land shortage shows that accurate information regarding crop production is becoming increasingly important. This information will assist crop management decisions and improve farm productivity. Traditional crop monitoring methods, using ground survey and aerial photography, have limitations that the use of low cost, lightweight and easily deployable drones can overcome,” concludes Monica.

For more information on the course offered by AFTP through Cranfield University visit https://www.aftp.co.uk/course/drones-crop-production/single_course

Zero twine offcuts left on the bales or in the field

• Improved quality of work while protecting the environment
• Elimination of animal feed contamination due to the digestion of twine offcuts
• Protecting the environment thanks to the elimination by not depositing twine offcuts across the field or during transport

Even stronger knots with higher tensile strength

• Up to 15% higher tensile strength with the same twine
• Increased daily productivity due to more efficient baling

No matter what they are made of (and for), big bales all have something in common: they need to be tightly-packed for more efficient handling and storage. Quality of bales is at the heart of baling excellence and knotting technology is key to preserve bale density and integrity during handling and transport.

New Holland has been pioneering double-knot technology for over 30 years, and based on this experience is now launching an exclusive improvement: the new patented Loop Master™ Knotter which will be introduced on all BigBaler models.

Large Square Baler customers seek maximum productivity, high density, a reliable knotter system and low cost per bale. The knotter is a key component in the baling process. The New Holland LoopMaster^™ Knotter fulfills these requests and sets a new standard in the industry.

Zero twine offcuts left on the bales or in the field

The loop-knotting process eliminates offcuts left loose on the bale (so improving forage quality) and in the field (so reducing environmental impact): in one season on 10.000 bales produced, we estimate the elimination of close to 6 kilometers worth of twine offcuts per season, which are normally left to pollute the ground and crop.

Even stronger knots with higher tensile strength

The Loop Master™ allow the twine to retain 15% higher twine strength – and this translates into efficient baling and considerable productivity benefit. Furthermore it reduce the twine cost for our customers by using a lower grade of twine to keep the bales together.

“A strong, reliable knotter paired with clean crop: at New Holland we are extremely pleased to have fulfilled this request coming from our customers.” says Felix Ramuenke, Global Product Manager for Large Square Balers at New Holland Agriculture. “The new LoopMaster^™ knotter substantially reduces the risk of twine snapping or knots untying, that can cause a lot of trouble to the operator – at the same time it maintains the most appreciated features of our industry-leading double-knot system, higher bale density with lower knotting strain and unparalleled packaging performance. Furthermore our customers & the environment benefit from the elimination of twine offcuts left on the bale or across the field”.

Norwegian manufacturer Kverneland has increased its drill portfolio with the introduction of the high-capacity, high-output, trailed DG II seed drill.

Available in 9 and 12m working widths, and lending itself to controlled traffic systems, the DG II uses Kverneland’s double-disc CD coulter. The 9m unit gets 72 coulters, while the wider 12m version is equipped with 96 coulters. Both models produce 12.5cm row spacings.

A number of improvements have been made with the introduction of the DG II. These include improved folding and machine balance to maintain a positive weight on the tractor. Transport dimensions include a 3m width and 4m overall height. Road speed capability is now 40kph, the dual metering units supply has been simplified, and hydraulic folding seed distribution heads included.

“The DG II’s cross-shaft is carried on the tractor’s lower link arms, and it gains a hydraulic weight transfer system that automatically tightens under the lower link arms as the drill is folded and unfolded,” explains Kverneland product manager Graham Owen.

This makes it easier to operate the DG II with a much smaller, lighter tractor – typically, 200–250hp – he adds.
A new toolbar feature called Active-on also balances and maintains pressure, both laterally and longitudinally, across the full working width of the DG’s coulter bar to improve seed placement depth, while delivering up to 80kg of coulter pressure.

The Isobus-controlled seed drill offers dual Eldos electrically driven seed metering units to feed each half of the drill from the grain-only 6,000-litre seed hopper. Seed rates extend from 2–320kg/ha, and include variable seed rate control. The dual distribution heads that supply the coulters can be equipped with a seed flow monitoring system to warn of blockages, and simplifying the use of this high-performance drill.

Options include a hydraulically adjustable clod board and a 12mm finger tine harrow in place of the S-tine following harrow. Dual track eradicators, LED lighting, seed flow monitoring system and hydraulic bout markers are also available. The Kverneland DG II is priced from £90,347.

Bridgestone is embarking on a nationwide tractor tour to bring its industry leading agricultural tyre to life to the farming world – and the wheels will be rolling into 10 locations across England and Scotland in September with a £200 donation on board.

The Bridgestone VX TRACTOR road run will bring its all-new premium product into town, stopping off in a number of destinations along the way from September 9 to 27, to show farmers and farm contractors how impressive the tyre really is.

It is hoped that interest and awareness will be generated around the product in an agricultural heartland of England, with Bridgestone experts will be on hand to demonstrate its capabilities through presentations featuring comparison test results.

During the pit stops, Bridgestone will also be donating £200 to the young farmers’ club, to help keep the future generation of farming on the right track.

The VX TRACTOR has been comprehensively designed and tested to work hard in both the field and on the road, even under heavy payloads. It is constructed from robust casings with extra-deep and extra-long lugs, ensuring outstanding traction and extremely long wear life. This means that farmers can go further and get more done, time and time again.  Developed for tractors of 100bhp and above, the VX-TRACTOR is available in 38 and 42-inch rear sizes as well as 24 to 34-inch front wheel sizes.

Bridgestone’s agricultural product manager Keld Andersen said: “The VX TRACTOR is such a top performing product that we wanted to bring it to the eyes of as many farmers as possible, courtesy of our specially created road run.

“We have focused on increasing wear life, especially on the road, and have made the lug on the VX-Tractor longer and wider, with up to 20 per cent more lug volume than many competitor products.

“A six-layer tread belt also helps to protect against damage and potential punctures and the surface area of the sidewall has also been reduced and reinforced, further diminishing the tyre’s vulnerability to puncture.”

For more information about the Bridgestone VX TRACTOR road run, visit http://www.pneutracteur.com/vx-tractor-road-run-uk